Reactivity of 3d transition metal cations in diethylene glycol solutions. Synthesis of transition metal ferrites with the structure of discrete nanoparticles complexed with long-chain carboxylate anions

Study of the reactivity of 3d transition metal cations in diethylene glycol solutions revealed several key features that made it possible to develop a new method for synthesis of the nanocrystalline transition metal ferrites. The 3-7 nm particles of [MFe2O4]n[O2CR]m, where M = Mn, Fe, Co, Ni, and Zn, ligated on their surface with long-chain carboxylate anions, have been obtained in an isolated yield of 75-90%. The key features are the following. Complexation of the first-row transition metal cations with diethylene glycol at a presence of alkaline hydroxide is sufficient to enable control over the rate of their hydrolysis. The reaction of hydrolysis leads to the formation of metal oxide nanocrystals in colloidal solution. The nanoparticles growth is terminated by an added long-chain carboxylic acid, which binds to their surface and acts as a capping ligand. The isolated nanocrystalline powders are stable against agglomeration and highly soluble in nonpolar organic solvents.     

Bipolar pulse conductometric monitoring of ion-selective electrodes: Part 1. Method development with a calcium-selective electrode and elucidation of the basic principles involved

The potential generated by a plastic-membrane calcium ion-selective electrode (i.s.e.) is shown to be indirectly measurable by a non-zero current method based on bipolar pulse conductance. Linear current—voltage curves are obtained using 0–5-V pulses; the current axis intercept is related to the i.s.e. potential. A simple electrical contact (e.g., platinum or stainless steel) can be used instead of a poised reference electrode as the counter electrode in this two-electrode system. Long-term exposure of the i.s.e. to calcium solutions causes an upward drift in the measured current. This drift is minimized by avoiding long exposure times to solution, rinsing the electrode between measurements, and constructing current—voltage curves for determination of the current axis intercepts. Voltage pulses lasting 100 μs are optimum for this method. Shorter pulses are subject to error from capacitive charging currents, and longer pulses yield poorer precision, and degrade the electrode through faradaic reactions. The measured signal is dependent upon Ca²⁺ concentration (rather than activity), making ionic strength adjustment unnecessary. The concentration dependence is induced by application of voltage pulses greater than ~ 15 mV in amplitude. Selectivities of the potentiometric and conductometric methods are shown to be comparable for a variety of interfering monovalent and divalent cations. The conductometric method yields a fast i.s.e. response because of induced migration of Ca²⁺ into the membrane. Response time decreases as the pulse height increases. Pulses greater than 2 V in magnitude yield response times limited by the solution mixing time rather than by the electrode.     

Base- and light-assisted synthesis of anthracenes from 3-allylnaphthalene-2-carbaldehydes

The synthesis of substituted anthracenes from naphthalene precursors is described. The key step involved heating ortho-allyl substituted naphthalene-2-carbaldehydes and potassium t-butoxide in DMF with concomitant irradiation from a high pressure mercury lamp to afford anthracenes in yields of 76-98%.     

Concise synthesis of anhydrovinblastine from leurosine

[reaction: see text] The Cp(2)TiCl-mediated deoxygenation of leurosine (1) afforded anhydrovinblastine (4) in good yield. Furthermore, as the reaction proceeded via a carbon-centered radical intermediate, this transient was also trapped by a hydrogen-atom donor to afford selectively reduced alkaloid 10.     

Elimination of methane from protonated acetaldehyde: The Ab initio transition state

The transition state (TS) for loss of CH₄ from protonated acetaldehyde has been located at the second-order Moller-Plesset (MP2)/6-31G(d,p) level of theory. The activation energy is predicted to be 263.9 kJ/mol starting from the more stable form (methyl and hydrogen E) and 261.6 kJ/mol starting from the less stable form (methyl and hydrogen Z) that is required for reaction. The products (methane and the formyl ion) are predicted to lie 136.6 kJ/mol below the TS for their formation. MP2 methods underestimate the heats of formation of both the TS and the reaction products by about 40 kJ/mol when compared with experiment. Restricted Hartree-Fock (RHF) calculations give much more accurate relative energies. The MP2 TS leads directly to fragmentation and is described as a protonation of the methyl group by the acidic proton on oxygen. Under RHF theory the reaction is stepwise. An RHF TS similar to the MP2 TS leads to a nonclassical intermediate (which is stable at this level of theory) that has one of the C---H bonds protonated. This mechanism (protonation of an alkyl group) appears to be a general one for high energy 1,2 eliminations from organic cations. (J Am Soc Mass Spectrom 1994, 5, 1102-1106)     

The utilization of chemical shift and spin-lattice (T1) relaxation time data for the discrimination of isomeric indenoisoxazoles

Treatment of 2-pivaloyl-1,3-indandione with hydroxylamine leads to the formation of a pair of isomeric indenoisoxazoles, the product formed dependent upon the cyclization conditions. Under acidic conditions, 8-t-butylindeno[1,2-c]isoxazol-7-one ( 5 ) is formed while under neutral or basic conditions, an oxime, 2 , is generated which may then be cyclized under acidic conditions to give 3-t-butylindeno[1,2-c]isoxazol-4-one ( 4 ). Although these isomeric indenoisoxazoles may be discriminated by chemical means, we were interested in developing an unequivocal method for distinguishing these and potentially other isomeric pairs by spectroscopic means. A ¹³C-nmr based method for the discrimination of these isomers which is based on the utilization of chemical shift arguments and spin-lattice relaxation data is thus presented.     

An ab initio study of the geometry,harmonic and anharmonic force fields,and fundamental vibrational frequencies of cis- and trans- thiolformic acid

The geometry, harmonic and anharmonic force fields, and fundamental vibrational frequencies of cis- and trans-thiolformic acid are studied ab initio in the 4-31G basis set. An extensive comparison is made between changes in diagonal and off-diagonal quadratic and cubic force constants and diagonal stretching quartic constants in going from the chain to the ring structure in thiolformic acid and formic acid. The changes in the force constants are indicative of a much weaker interaction in the trans conformer between S? H and O?C, compared with O–H and O?C, in keeping with the weaker hydrogenbonding property of the S? H group in general.     

SINGLET OXYGEN REACTIONS WITH 2,7-DIMETHYL-2,6-OCTADIENE

Abstract— Results concerning Rose Bengal sensitized photoxidation of 2,7-dimethyl-2,6-octadiene (A) are discussed. This diolefin may be considered as a model molecule of polyisoprene of polymerization number two with 1,4-4,1 addition mode.
All the mono- and dihydroperoxides apt to occur are actually obtained. One of the occurring hydroperoxides, 2,7-dimethyl-dihydroperoxy-3,5-octadiene, which has the structure of a conjugated diene, does not lead to an endoperoxide. This is contrary to Kaplan and Kelleher's hypothesis. On the other hand, no trihydroperoxide forms as a result of further addition of singlet oxygen (¹O₂).
A complete kinetic study has allowed us to determine the rate constants of all the reactions which take place. The reactivity of (A) is twice that of 2-methyl-2-pentene and the addition of ¹O₂ to one of the double bonds of (A) induces deactivation of the remaining double bond.     

Isomerisation in the chemistry of platinacyclobutane complexes

The platinacyclobutane complexes PtCl₂L₂(C₃H₅Me)], L  pyridine, CD₃CN, or tetrahydrofuran, exist as mixtures of isomers containing P$\text{tCH}{}_2\text{CHMeC}$H₂ or P$\text{tCHMeCH}{}_2\text{CH}{}_2$ groups in rapid equilibrium. Decomposition occurs in some cases to give [PtCl₂L(CH₃CH₂CHCH₂)]. Stereospecific skeletal isomerisation also occurs in metallocyclobutanes containing the groups P$\text{tCHRCHRC}$H₂  P$\text{tCHRCH}{}_2\text{C}$HR, when R  aryl further decomposition gives ν-allylplatinum complexes.     

Thermal conductivity measurements on ferrofluids

The thermal conductivity of a number of ferrofluids consisting of colloidally dispersed Fe₃O₄ particles in diester, hydrocarbon, water and fluorcarbon carriers have been measured at 38°C. The variation in thermal conductivity with particle concentration is well described by Tareef's equation (1940). This has enabled the ratio of the physical to magnetic size to be determined and compared with estimates of the ratio obtained from electron micrographs and magnetic measurements.The fit between theory and experiment is particularly good for hydrocarbon carrier fluids giving the ratio of solid to magnetic radiusR _i/R _m=1.24±0.03 compared with the value obtained from magnetic data and electron micrographs of 1.19±0.07. The corresponding value from the fluids with a diester carrier ranges between 1.1<R _d/R _m<1.3 which is again consistent with microscopy and magnetic data.The application of a magnetic field of 0.1 T had no noticeable effect on the thermal conductivities of ferrofluids.